Here are some steps that will help you cut coins with a scroll saw:
1. Choose The Right Coin To Cut:
All coins are not created equal. A thick, clean-edged coin is the best. Copper or brass are the best materials for cutting coins with a scrollsaw.
2. Trace The Outline Of The Coin:
Use a marker to trace the outline of the coin on a piece of paper. This will allow you to plan ahead.
3. Take Out The Traced Outline.
You can use a pair of scissors to remove the traced outline.
4. Draw Your Cuts Onto The Paper Template:
Now, its time to start planning your cuts. Mark the areas you wish to cut on your paper template. Make sure to leave enough room between each line so that you can easily cut the coin.
5. Take The Template Out Of The Paper.
Use a scissors to cut out the paper template.
6. Place The Paper Template Onto The Scroll Saw Blade.
Carefully place the paper template on the scroll saw blade. Place the paper template on the scroll saw blade so that it is in a straight line and no cuts overlap.
7. Start Cutting:
Turn on the scroll saw and slowly start cutting along the lines you drew earlier. Be careful not to press too hard or you may damage your coin.
8. Take Out The Paper Template
After you are done cutting, remove the template paper carefully from the scroll saw blade.
9. End Cutting Your Coin
Use a pair of pliers to finish cutting your coin. Make sure to cut all the way around the coin.
10. Sand Down The Edges:
To sand the coin’s edges, use sandpaper. This will give your coin a smooth finish.
11. Polish Your Coin:
Finally, polish your coin with a metal polish to give it a shiny finish.
Now that you know how to cut coins with a scroll saw, you can create all sorts of beautiful jewelry projects. You can create different effects by using different sizes and shapes. Have fun experimenting!
Safety Tips:
These are safety tips to remember when you cut coins with a scrollsaw:
You should ensure that the blade is in tip-top condition. Dull blades can cause accidents.
Always use a push stick to help guide the coin through the blade. This will keep your fingers and hands from coming in contact with the blade.
Keep your hands and fingers away from the blade at all times.
Be careful not to cut yourself on the edge of the coin.
Some Common Mistakes:
Here are some of the most common mistakes people make when cutting coins with a scroll saw:
1. Do Not Use A Steady Feed Rate
This will cause your blade to wander and could potentially cause it to break.
2. Cutting Too Deeply
You can cause damage to the coin by cutting too deep. This could lead to a decrease in its value.
3. Not Clamping The Coin Securely
If the coin isnt clamped securely, it can move around while youre cutting it, which could cause the blade to hit your fingers.
4. Use The Wrong Type Blade
You can endanger the coin and create dangerous flying debris if you choose the wrong blade.
5. Safety Goggles Should Not Be Worn
You could be hit in the eye if pieces of the coin fall off your cutting board.
FAQs:
How Can You Determine The Coin Slot Size?
The size of the coin slot will depend on the size of the coin youre cutting. To determine the exact size, you will need to cut a test piece.
Is There A Specific Blade You Should Use For This Type Of Project?
There is no one blade that you should use. It is important to choose a blade specifically made for cutting metal.
Is It Possible To Use A Jigsaw In Place Of A Scroll Saw?
No, you should not use a jigsaw for this type of project. A jigsaw is not designed for cutting metal and could damage the coin.
What Should I Do If My Fingers Get Too Close To The Blade?
You should not cut too close to the blade. Instead, move the coin to another position. You should never attempt to remove the coin from the blade while it is still spinning.
How Can You Stop The Coin From Falling Out Of The Slot? ?
A clamp or vise grip can be used to keep the coin in its slot.
Conclusion:
We have shown you how to use a scroll saw to cut coins. It is a very easy process that only requires a few simple steps. You will be able create beautiful coins pieces quickly if you have the right materials and tools.
